Icon Vehicle Dynamics – ICON 14-21 Toyota Tundra Rear RXT 2.5 VS Remote Reservoir/CDEV Shocks Pair for 2014-2021 Toyota Tundra 57823EP

ICON Vehicle Specific (V.S.) 2.5 Aluminum Series shocks with CDEV are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in both length and damping tune. For piggyback and specific remote reservoir applications, ICON’S unique use of a 6061 billet aluminum manifold a few inches below the top cap of the shock creates an internal Bump Zone that when used creates an additional 20% of damping force. This additional force helps prevent harsh bottom outs and controls the suspension when compressing at high velocity. This RXT rear shock features a side-mount eyelet making it shorter in collapsed length, longer at extension, and still fit in the factory mounting location, allowing for additional wheel travel when paired with ICON Multi-Rate Leaf Springs. Like all ICON’S Shock Absorbers, V.S. 2.5 Aluminum Series shocks with CDEV are 100% rebuildable and 100% revalveable.

View Installation Instructions

Features:

< li >ICON’s CDE Valve technology allows for in vehicle adjustment of compression damping settings and active adjustment via the ICON Intelligent Control (IIC)

< li >ICON’s internal “Bump Zone” increases damping by 20% to provide more control as the shock approaches full compression

< li >One-piece, hard anodized, impact extruded aluminum cylinders offer excellent corrosion resistance and consistent finish

< li >Remote reservoir design improves heat dissipation to reduce shock fade during prolonged use

< li >Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range

< li >Nitrogen charged monotube design with piggyback reservoir

< li >One-piece digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road

< li >7/8″ diameter induction hardened, chrome plated shock shaft

< li >PTFE lined spherical bearings and application specific mounting hardware

< li >6061 aircraft grade aluminum CNC machined components

< li >100% Rebuildable

< li >100% Revalveable

Specifications:

< li >Add-On Part: 252012 – -4 TO -10 HOSE SHIELD KIT

< li >Add-On Part: 53506 – 14-UP TUNDRA IIC INSTALL KIT

< li >Add-On Part: 58750E – 14-UP TUNDRA 2.5 VS RR CDEV COILOVER KIT

< li >Adjustable: Electronically

< li >Boot Included: NO

< li >Bore Diameter: 2.25 IN

< li >Cylinder Color: Grey

< li >Cylinder Material: Aluminum

< li >Damping Type: Oil

< li >External Reservoir: Yes

< li >Gas Charged: Yes

< li >Grade Type: Performance

< li >Lower Mount Type: EYELET

< li >Mounting Hardware Included: Yes

< li >Service Parts: 252011 – 2.5 PIGGYBACK/REMOTE RESI/BYPASS REBUILD KIT

< li >Service Parts: 257342 – 7/8 SHAFT 16.85 OAL, 12.00 TRAVEL

< li >Service Parts: 611008 – 9/16 RXT HEAVY DUTY STEM BUSHING KIT

< li >Service Parts: 254100G – 1 GALLON ICON PERFORMANCE SHOCK OIL

< li >Service Parts: 252001 – 2.5 FIXED SPANNER WRENCH

< li >Service Parts: 252002 – UNIVERSAL SPANNER WRENCH (2.0/2.5/3.0)

< li >Service Parts: 252003 – SEAL INSTALL TOOL 2.5/3.0

< li >Service Parts: 191015 – 10″ FINNED RESI UPGRADE KIT

< li >Shaft Diameter: 0.875 IN

< li >Shaft Material: Chrome

< li >Shock Absorber Body End Measuring Point: Center of Eylet

< li >Shock Absorber Rod End Measuring Point: Center of Eylet

< li >Tube Outside Diameter: 2.5 IN

< li >Upper Mount Type: Stem

Notes:

• Also Requires Installation Of Iic Kit (Part # 53506) And Cdev Front Coilovers (Part # 58750E)

< li >Icon Multi-Rate Leaf Springs Part # 158509 (Qty 2) Required For Installation

< li >Only Compatible With Models Equipped With 5.7L V8 Engine

Fitment:

< li >Toyota Tundra 2014-2021

WARNING: Cancer and Reproductive Harm